F.A.Q. - Frequently asked questions

Anti-skid chains can be fitted to the Wheels if required.
You can find a selection of these on our accessories page or in the configurator.

Yes, the Accumulators in the agria 9700e are safe and non-hazardous when used as intended.
As the Accumulators are permanently installed in a steel frame, they cannot be replaced without assembly.

Yes, there are state subsidies. However, these vary from state to state in Germany.
Please contact us if you have any questions about financing. Please use our contact form.

No, tillers are used for this purpose.
Power hoes are suitable for planting and bedding areas.

Yes, the agria 5900 Bison/Taifun or Cyclone can mill with a Stone burier.
No swivel Handlebar is required here, as this is mounted at the front.

As an end customer, you cannot purchase spare parts for agria products directly from agria. Please contact an authorized agria dealer to purchase the required spare parts. Use our dealer search to find a specialist dealer near you.

Alternatively, you can also select spare parts via our spare parts search. Your order will be processed and shipped by the agria sales partner you have selected. They will contact you and provide you with a quote for the selected items.

For specialist dealers without a customer number, we recommend contacting the responsible wholesaler for spare parts inquiries or our field service for article orders. Our dealer searchwill help you to find the right contact person.

For further support, please contact our customer service or use our contact form.

The brush disc of the agria 8100 can be adjusted extensively to work on different surfaces.
For effective removal of weeds from edges and walls, it is recommended to fix the brush disc to the left or right of the center and tilt it sideways.

The agria 8100 machine is equipped with a Splash guard as standard to prevent loosened weeds and other objects from being ejected.
Two Protection liners can also be mounted for maximum protection against ejection.

The agria 8100 machine can be adapted to different needs thanks to different Brushes.

The agria 9700e is not yet able to drive autonomously.
However, this is in preparation.

The Handlebar on the agria 5500, agria 5900 Bison/Taifun or Cyclone can be swiveled sideways in both directions so that the machine can also be guided in an offset position.
E.g.: on walls, fences and unpleasant vegetation such as nettles or thorn bushes.
The Handlebar cannot be rotated through 180°. This function is required if both front and rear attachments are to be used.
Our single-axle machines such as the agria 3400 are suitable for this.

Yes, the Steering handle on the agria 8000 can be adjusted without tools and brought into a transport position.

Yes, with the agria 7100 or other Basic equipment and implements, you can also sweep in summer.

Sweepers are a very good choice for clearing areas of snow up to a snow depth of approx. 15 cm.
We recommend using the coarse brushes for this, which achieve a very good throwing effect due to the strong bristles and the wide spacing between the rows of brushes, thus effectively clearing large areas of Schnee.

Yes, and a Powerhoe is used to loosen the soil in the same step.

There is a Ridger and a Ridger in the agria product range. The Ridger fits the agria 0800, the Ridger fits the agria 0100, agria 3400 and agria 3600.

No, the agria 9500 has no lubrication points.

There is a suitable ABE for this. Please contact us via our contact form.

All 4-stroke engines (for example, Honda, Briggs & Stratton, Robin) from the current agria product program, not older than 10 years, can be used with E10 fuel. For the older engines and two-stroke engines, we have unfortunately no release from the engine manufacturer. We therefore recommend to use instead of E10 fuel the fuel Super Plus with 2-stroke mixing oil or alternative fuels such as Aspen.

Our agria 5300 can be used for a wide range of applications in green space maintenance and area maintenance. Whether it's a narrow stand of trees or a slope, a natural garden or the banks of a pond - the agria 5300 is exactly the right Grassland Mower for difficult terrain.

The agria 8000 is a Bush and grassland mower for extensive vegetation.
Depending on the thickness and density of the vegetation, the machine can reach a height of up to 30 cm.

The agria Autom. cultiv. attachem. is specially designed for water-bound paths. These surfaces are made of natural stone material and are particularly common in parks, cemeteries, along hiking trails and on sports fields. The special feature of these paths is that they must be naturally permeable to water. The device with its rotating working tools loosens wild herbs and their roots and at the same time loosens the compacted soil surface. This not only achieves surface maintenance, but also restores water permeability - an important aspect that other weed removal devices do not offer.

Trailer operation is only permitted for single-axle vehicles with a Differential version.

A Stone burier goes down to a depth of 12 cm.

You can find all contact options on our contact page.

Unfortunately we can not provide general operating licences for agria devices. However, you have the option to go directly to the MOT.
In order to participate at the public traffic with the trailer you need a general operating licence fort he trailer.
Sample templates can be found in the download area.

Unfortunately, it is not possible for us to issue an ABE retrospectively.
However, you can find the right sample ABE for you on our homepage under Classic car documents.
You can find this under Service > Downloads in the category "Classic car documents (ABE) samples"
With this you would have to go to a technical approval center (TÜV, GTÜ...) and carry out an individual approval there.

When digging potatoes, the Potato digging plough is pulled across the field and lifts the potatoes with the surrounding soil. The Filter seaweeds separate the soil from the potatoes and deposit the potato tubers next to the plow on the soil surface. Our matching Basic equipment: agria 0100, agria 3400 and agria 3600

The agria Seeder enables precise and uniform sowing thanks to its mechanical metering system. Depending on the model, it can be mounted directly on agria single-axle tractors or Implement carriers. It is ideal for lawn seeding, reseeding, catch crops or fine seeding in landscape maintenance. The precise seed distribution ensures uniform plant growth and efficient land utilization.

Thanks to the center of gravity adjustment on the agria 5900 Bison/Taifun or Cyclone, the weight balance of the Basic equipment is adapted to the respective Implement or to the respective conditions.
This enables the user to guide the machine easily with little effort.

The Cutter bar mower works with a scissor cut principle: a moving blade glides along a fixed blade and cuts the grass like a pair of scissors. This system is particularly gentle on insects and the sward.

The Basic equipment weighs approx. 55 kg, depending on the equipment and beam type. The agria 3600 BM is powered. Drive is typically provided by a 4-stroke Benzinmotor with 3 forward and 3 reverse gears. For further details, please refer to the technical data.

Cleaning the Cutterbar after every Insert is recommended. The blades should be resharpened regularly. The blade clearance must also be checked regularly and readjusted if necessary. The moving parts must be lubricated according to the maintenance schedule. Please refer to the Operating instructions in our Download Center for the exact details.

With the agria 9500, the cutting height is set using the remote control.

Via a laterally movable pipe flange.

The battery life of the agria 9700e depends on the Implement, area of application, surface and environmental conditions.
You can find some examples in our product catalog.
Here you will also find examples of the Accumulator charging times with different Chargers.
The agria 9700e can also be used at a vehicle charging station via an adapter.
A list of the different chargers can be found on the product page and in our configurator.
 

There are a total of five different versions of the agria 3400.
These differ in terms of Engine variants, Differential, KL and Fast speed for trailer operation.

The Cutterbar of the agria 3600 BM is usually 117 cm to 125 cm wide. The exact width depends on the type of bar fitted (e.g. finger bar or municipal cutter bar). In our configurator, you can quickly see which Cutterbar fits and what width it has.

Cultivating means loosening the soil, removing weeds and making it ready for sowing - typically at a depth of around 5-15 cm. To work the soil optimally, the weather conditions should be as follows:

• Dry, but not parched soil
• Dry weather for the next 1-2 days
• Mild temperatures (approx. 10-25 °C)
• No frost or ground frost

The agria 0800 is a Power hoe with the Hoeing tools mounted on the Axle.
In addition, the Power hoe does not have a closed tiller box.
Power hoes are used where areas are regularly cultivated, e.g. planting areas.

Yes, the agria 3600 BM is suitable for working on steep slopes. Thanks to its low design, low center of gravity and optional slope tires, the agria 3600 BM offers good stability.

Yes, with the appropriate Implement such as a Snow dozer80 or Snow thrower, the agria 3600 can also be used for winter service

The agria 7100 Cleanstar comfort is characterized by its excellent winter service properties. Thanks to the easy-to-start engine, it can be started effortlessly even on cold winter days. Thanks to the infinitely adjustable brush speed, the agria 7100 Cleanstar premium can be adapted to the sweeping material and sweeps even fine, loose snow to the side without whirling it around wildly.

The length of the grass is always a guide when mulching the lawn. As soon as the blades of grass have reached a length of 7 to 8 cm after winter dormancy, you can mow or mulch for the first time.

Under normal conditions, the agria 9600 machine can be used on slopes of up to 55°.

Our agria 3100 is a true-to-track Single wheel cultivator that protects the surrounding plants and plant parts thanks to its compact design. With a well-balanced power-to-weight ratio and durable Hoeing knives that enable reliable continuous use, the agria 3100 impresses across the board.

Spiked wheels increase traction on slippery surfaces, such as when working with hay or wet grass. In contrast to mesh wheels, they are lighter and have a finer grip.

The Broom drive and travel speeds of the agria 7100 Cleanstar comfort (approx. 76 kg without Wheels) has one gear, while the agria 7100 Cleanstar premium (approx. 94 kg without Wheels) has a variable Broom drive and variable travel speed.

Wheel weights increase the ground pressure and thus improve traction - especially for heavy work or on difficult terrain.

With the agria 9500, the Cutting height can be adjusted electrically and steplessly from 30 to 130 mm via the display using the remote control.

Depending on the equipment, our agria 3600 has an unladen weight of approx. 51 kg to approx. 62 kg. With additional implements, the weight increases by the weight of the implement itself. The agria 3600 is equipped with a Benzinmotor. Engine power is transmitted via a mechanical gearbox with 3 forward and 2 reverse gears. Here you will find further technical data of the agria 3600

With remote-controlled devices such as the agria 9500 or agria 9600, a powerful combustion engine supplies the power for the electric traction drives.
The power of the combustion engine can be fully utilized for the Cutter Drive.

Snow dozer/snow shovel/snow sweeper: at least 6 hp
Snow throwers: depending on the Implement
You can put together the right Basic equipment for your application using our product configurator.

There are two different engine variants for the agria 3400.
Depending on customer requirements, a Benzin or Diesel version is available.

Power hoes are suitable for the top layer up to approx. 10 cm.
Tillers go deeper into the soil and are also well suited for compacted areas.
Tilling also achieves a better mixture of the soil material.

Hydrostatics such as the agria 5900 Bison/Taifun or Cyclone are hydrostatic (oil motor).
This means that there is no purely mechanical Connecting between the Engine and the Drive gears.
This makes it possible to control the driving speed and direction steplessly and without shifting gears.
Another advantage is that the flow of power to the Zapfwelle is not interrupted.

The front mounted sweeper  is an ideal solution for snow heights up to 8 cm in any case!
The other alternative would be the snow dozer, often referred to as a snow shield. It is suitable for snow heights above 8 cm.
If there are more than 20 cm of snow, the snow thrower would be the best choice.

Levelling is the levelling of a surface (levelling, Tarpaulin) but also the partial recompaction of a milled surface.

The clippings that remain on the meadow or lawn after mowing still need to be collected. This is also known as clearing. This can be done wonderfully with our Hay pusher or Band rake.

Mounding is a gardening technique in which soil is lifted around the plant stems to support them and promote tuber formation in potatoes. This technique is also used for other vegetables such as beans and leeks. Mounding promotes aeration of the soil and ensures a better water supply for the plants.

The grass clippings left behind serve as a natural fertilizer and Guard the soil, resulting in a healthier, denser lawn.

Iron mesh wheels provide extreme grip on slopes or loose ground. Particularly useful for mowing work on steep terrain.

The agria 3600 is a Two-wheel tractor or single-axle machine designed for versatile applications in horticulture and landscape maintenance. It can be combined with a wide range of implements, such as Cutterbars, Tillers, Sweepers, Band rakes, Snow throwers, etc. In contrast to the agria 3600 BM , the agria 3600 can also be used for soil cultivation.

The agria 3600 BM is a Two-wheel tractor or single-axle machine designed for versatile applications in horticulture and landscape maintenance. In addition to the Cutter bar mower, Sweepers, sickle mowers or snow blades can also be mounted, for example. Unlike the agria 3600, the agria 3600 BM cannot be used for soil cultivation.

The most effective way is to sweep the area to be cleaned in a circle.
Depending on the direction of travel, position the Sweeper at an angle to the left or right and start sweeping the outside of the area inwards in a circle.
All the debris is swept into the center of the surface and can simply be picked up at the end of the process.

The difference between a Ridger mounting body and a Ridger device lies in their technical functionality and design within agricultural technology, particularly in plant care and soil cultivation.
The Ridger mounting body is a single implement or tool part that is actively used for ridging. It usually consists of a Link, a Share or wings that push the soil sideways towards the plant and performs the actual mechanical work of raking, e.g. heaping up soil on potato plants.
The Ridger device, on the other hand, is the complete technical device or assembly in which one or more Ridgers are installed. In addition to the ridgers, this also includes frames, fastening elements, Vertical adjustment handles, depth guides and, if necessary, drive elements. This is used for the overall operation and adjustment of the raking process.

On a single-axle machine such as the agria 3400, the Steering handle can be rotated by 180* to increase the attachment options for the Implement.
On Implement carriers such as the agria 5900 Bison/Taifun, the Handlebar can only be rotated by 30*, which means that all implements can be operated from the front.

A Stone burier is a special type of milling machine in which the coarse material is covered by the fine material.

The main difference between mowing and mulching lies in how the clippings are handled. When mowing, the grass is cut with a Lawn mower and the clippings are collected in a grass catcher or raked away and disposed of. Mulching, on the other hand, involves finely chopping the clippings with a mulching mower and spreading them on the lawn. There it rots and serves as a natural fertilizer and protects the soil from drying out.

• Field lug tires: Coarse tread for maximum traction on soft or loose soils - ideal for soil cultivation.
• Turf tires: Flatter profile, gentle on the soil - ideal for well-tended lawns or green areas.

Front mounted sweepers, which are suitable for combination sweeping, can be extended with additional functions, unlike "simple" sweepers .
For example, the sweepings can be collected directly via a dirt collection container.
Mounted side brushes can also be used to sweep close to kerbs or walls.

With the agria 3400 Differential version, the Differential can be opened and closed.
When milling, both Wheels should be driven and therefore the Differential should be closed.
When turning and reversing, the Differential should be open to allow Overrunning of the Axle and thus easy operation.

The Handlebar version enables easy steering of the Basic machine.
Here, two additional Steering brakes are mounted on the upper beam, which are used to control the steering movements.

A rubber-mounted Handlebar on the agria 5500, agria 5900 Bison, Taifun , Cyclone reduces the vibrations transmitted to the hands.
This is particularly important with oscillating (swinging, swinging arm) implements such as Cutterbars or Smoothing and levelling rakes and enables fatigue-free working.

Due to the signal strength of the Remote Control, the maximum range of the agria 9600 is approximately 300 meters.
As no user can control the machine precisely at this distance, a maximum distance at which the user can safely control the machine is recommended in practice.
The range is usually a maximum of 80 - 100 meters.

Regular maintenance is recommended for the agria 3600. This includes changing the oil, cleaning the air filter, checking the Spark plugs, Belt and Gear. The exact maintenance intervals and checks can be found in the Operating instructions. You can find these in our Download Center.

The agria 9600 machine easily mows one-year-old extensive growth.
Dense shrubbery and woody growth with a diameter of up to approx. 2-3 cm is also possible.

agria 8000 comfort: 1-cylinder 4-stroke petrol engine 4.2 kW (5.7 hp)
agria 8000 premium: 1-cylinder 4-stroke petrol engine 4.2 kW (5.7 hp)

There are different diameters and widths depending on the implement and work application.
These must be selected to suit the implement and the insert in the terrain.
Information on this can be found on the application pages, under Accessories and in the product configurator.

For optimum sowing results, the metering roller, working depth and forward speed should be matched to the seed used. An even soil surface and the correct tilling - for example by pressing down with a Roller - ensure that the seeds are firmly attached to the soil. This ensures even emergence and dense greening.

For ploughing, a tractor should be equipped with the largest possible Drive wheels and Additional weights. With its 10-inch Wheels, Wheel weights and Front weight, the 0100-R Power hoe is as powerful as a Two-wheel tractor.

• End customer
  • Please contact the retailer from whom you purchased the product
• Dealer
  • Please contact our customer service at kundendienst(at)agria(dot)de, or use the online warranty application in the dealer area

Snow dozer: Fresh snow/powder snow up to a height of approx. 15 cm.
Snow throwers: from approx. 15 cm and higher.

the agria 9700e is equipped with a modular 24.8 kWh / 480 Ah Lithium-ion Accumulator with 48 V safety extra-low voltage.
 

The working widths of the agria 0800 are 30, 55 and 85 cm, which are included in the scope of delivery.
The Hoeing tools are attached without tools, making the three working widths possible.

The agria Autom. cultiv. attachem . 5594 842 is available in two versions: the model 5594 842 with a working width of 90 cm and the model 5594 852 with a working width of 100 cm. The 90 cm version is sufficient and economical for small to medium-sized areas. The 100 cm version is better suited for large areas such as extensive parking lots or squares, as it offers a higher area output per working hour. Both models have an infinitely variable depth adjustment of 0-4 cm so that the working depth can be flexibly adapted to different ground conditions and degrees of soiling.

Multiple tires provide more contact area and better Base protection. Particularly useful for maintaining green areas or working on slopes, but not for soil cultivation, where traction is crucial.

Cultivation should take place in spring between the beginning of April and the end of May and in fall between mid-September and mid-October.

For end customers:

Please contact an authorized agria dealer for information on prices and availability of spare parts or items. Use our dealer search to find a dealer near you or start an inquiry via our spare parts search.

For specialist dealers without a customer number:

If you are a specialist dealer and do not yet have a customer number, please contact your responsible wholesaler for spare parts inquiries or our field service for article orders. Our dealer searchwill help you to find the right contact person.

To access the documents, log in to our website with your dealer login.
You will then find the documents under Service > agria-Workshop Media Library

You can find old and new spare parts lists as well as operating instructions in the service under Download or in the spare parts search on our homepage.

In principle, the spare parts trade functions only through our dealer. We do not send parts to end users. There will take place a cash sale at the factory in Möckmühl during business hours.
To request pricing or availability of parts you should have ready the appropriate replacement part number from our list of spare parts especially for older devices. Of course, not all parts are available forever. Remainders of older stuff are still partly available.
Some parts are no longer available, you can contact agria fan club in this matter. Or try a request in our forum under the category search / offer for the fans on our website. Set requests / offers are free.

Our Spreader is suitable for: agria 3400, agria 3600, agria 3600 BM, agria 5500 and the agria 5900 series

• Large-scale planning:
  • The triple levelling rake can be used to quickly and effectively level out large irregularities and recompact the surface
• Planning:
  • with the Rotary harrow, even inexperienced users can achieve very good fine planning.
• Preparation for turf:
  • The Rotary harrow is used to prepare the ground for the turf. The surface is leveled and roughened so that the turf lies cleanly and can connect well with the topsoil underneath (i.e. grow well)
• Rework after tilling or plowing:
  • This can be done with either a Rotary harrow or a leveling rake. The surface is leveled, recompacted and coarse lumps are broken up.

A snow blade, Snow dozer 80 and broom are suitable for clearing snow.

The agria 9700e can be fitted with trailed and pushed implements with PTO drive and Cat 1 support (three-point power lift) and a maximum tare weight of 300 kg.
The machine is therefore ideal for the following applications:

• Soil cultivation such as crumbling, milling, levelling, ..
• Green space maintenance: mulching, mowing, Weed removal: mechanical weed removal with brushes, ..
• Area maintenance: Snow clearing, snow sweeping, salt spreading, Snow throwers, ..
• Forestry work
• and much more. Please contact us about your requirements using our contact form.

There is also an additional hydraulic connection for implements (without permanent hydraulic power take-off).
The PTO power is roughly comparable to a 30 hp tractor and can be adjusted in both clockwise and counter-clockwise rotation in steps of 100 from 100 to 1,000 revolutions.

You can find an overview in the lubricant table in the spare parts search.

The test winner in the magazine "selbst ist der Mann - Das Do-it-yourself-Magazin" is the agria 0700 MH 50.

Wheels with AS profile or with Anti-skid chains if possible.
You can find a selection of these on our accessories page or in the configurator.

The agria 3400 KL (curve Steering) are not approved as they are far too dangerous in operation.
When the Steering brake is actuated, the Wheel would lock completely and the single-axle tractor would fold in.
In this case, it is only possible to carry out steering movements by changing direction on the upper beam with the Differential open with the differential version.

A Stone burier is used to loosen and aerate the soil.

Cultivation should be done to loosen or break up the soil, which improves plant growth.

Spreading salt, sand or grit is an important addition to snow clearing. The grit ensures better grip on slippery surfaces. An even distribution of grit is the most important quality criterion. Our Spreader distributes the grit particularly evenly.

Weed removal is important to ensure traffic safety on sidewalks and roads, as weed growth can narrow them. It also contributes to the aesthetics of the cityscape and prevents weeds from spreading on paved surfaces. Regular removal prevents the spread of weeds on paved areas, which reduces costs and effort in the long term. Our mechanical Weed sweepers remove weeds quickly and effectively.